United States
Work location
Requirement: 450L LNG Cryogenic Tank Design with PESO Compliance Anyone
About the job
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensor... read more
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensor... read more
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tan... read more
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tan... read more
Hello,
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Before proceeding, please note the following key requirements:
Design must be fully compliant with PESO (India) and PNGRB Schedule-4 safety standards.
Tank must be suitable for vehicle retrofit application (mobile use conditions).
Integration of telematics-based live monitoring system is mandatory.
🔧 PROJECT REQUIREMENT
We are planning to develop a 450-liter LNG cryogenic storage tank for vehicle retrofit applications in India and are looking for an experienced design engineer/team.
The design must strictly comply with Indian safety regulations and international pressure vessel standards.
📐 DESIGN REQUIREMENTS
Double wall vacuum insulated LNG tank
Horizontal cylindrical configuration
Capacity: 450 Liters
Compliance: • ASME Section VIII Div 1
• PESO (India approval)
• PNGRB Schedule-4
Operating Conditions: • Temperature: -162°C
• Working Pressure: 8–16 bar
• Design Pressure: Minimum 20 bar
Inner & Outer Tank: • Annular gap: 70–100 mm
• Insulation: MLI / Perlite
• Inner material: SS304 / SS316L
⚙️ FITMENTS & PIPING
Minimum 2 Safety Relief Valves
Pressure gauge (above liquid level)
Level gauge + High level alarm
High level auto cut-off
Emergency Shut-Off Valve
LNG Fill Line → Bottom
Vapor Line → Top
Piping as per ASME B31.3
🔥 SAFETY SYSTEM
Emergency Shut Down System (ESD)
Fire detection integration
Auto shut-off on fire / leakage / excess flow
Boil-Off Gas (BOG) handling system
📡 TELEMATICS SYSTEM
Pressure, Temperature, Level sensors
Vacuum monitoring
GPS tracking integration
CAN / RS485 / Modbus output
Real-time alerts: • Overpressure
• Leakage
• Temperature rise
• Vacuum failure
📦 DELIVERABLES
2D drawings (AutoCAD/PDF)
3D model (STEP/SolidWorks)
Nozzle layout
BOM
Stress calculation report
Welding & joint details
PESO compliance notes
📊 FUTURE SCOPE
Bulk production planned (1000+ tanks). Long-term collaboration possible.
Kindly share your experience, sample work, and quotation. read less
Things to know
Expert
Skill Level
Open budget
Hourly
Part-time
Job type
6+ months
Job duration
Areas of expertise
Fuel Storage Tanks
Gas Pipeline Design
Natural Gas Calculation
Oil & Gas
Oil & Gas Platform Design
Oil and Gas
+3 more
Job categories
Structural Design Services
Mechanical Design Services
Mechanical Engineering
Structural Engineering
Design Engineering Services
+2 more
Languages
Marathi
Professional working proficiency
About the client
Payment not ready
India (12:36 am)
Posted
Active
Job activity
11 Applicants
0 interviews in progress
Similar jobs
Mechanical Design of a Transforming Mirror Cube Secret Box with Gear Mechanism
Remote - Posted
I am looking for a skilled Mechanical Engineer to design a 3D model for a "Mirror Cube" that transforms into a secret jewelry/ring box using an internal gear mechanism, exactl...
Mechanical Design Services
3D Modeling
3D Design Services
View job
Pallet Dispenser
Remote - Posted
We are ATM Lazić, a Serbian manufacturer of industrial packaging machinery with 30+ years of experience serving EU clients. We need a complete mechanical design package for an...
3D Modeling
3D Product Modeling
Manufacturing Drawings
Mechanical Engineering
Machine Design
View job
Designer needed for Stress Analysis and Support Load Calculation for Fire Pump Room Piping System
Remote - Posted
We are seeking a piping stress analysis designer/engineer to perform a detailed stress analysis and support load calculation for a fire pump room piping system based on the at...
Engineering Design
FEA Finite Element Analysis
Structural Engineering
Mechanical Engineering
View job
Mechanical design engineer for panel components development drawing
Remote - Posted
Experience in designing electrical panel components development drawing and converting to nesting drawing for lasar cutting
Mechanical Design Services
Design Engineering Services
Mechanical Drawing Services
View job
mechanical draftsman
Remote - Posted
i want to create an HVAC system drawing for a villa in Qatar. candidate should be available in qatar.
Mechanical Drafting
Design & Drafting
Mechanical Design Services
View job
Comparative Impact Analysis of Tubular, Monocoque and Hybrid Occupant Structures for a Lightweight Two-Seat Vehicle
Remote - Posted
A comparative structural impact study of three lightweight occupant-cell concepts for a small urban vehicle:
1. Tubular frame (aluminium)
2. Monocoque frame (preferably carb...
Mechanical Engineering
SolidWorks Engineering Services
FEA Finite Element Analysis
View job
