Hire the best freelance Design and Analysis expert designers for your company

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, ro... Read more

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, robotics, consumer electronics, process valve controller, and elevator device industries. With over 8 years of experience in the iterative product development process, I've gained the experience and skill set necessary - in 3D CAD, model creation, design for manufacturability and assembly, manufacturing expertise, prototyping, test development, project management, and supply chain management - to bring your ideas to life seamlessly and efficiently. No matter what - the scope/size of the project, product, or material - I can help you get it manufactured and into your hands quickly. There are no restrictions or requirements to my service, if you'd like for me to just create the design files then that's not a problem either. Please feel free to contact me with any inquiries. I'm looking forward to working with you. **Resume and design portfolio available upon request**

Hello All, This is Saravana Kumar, having 3 years experience in Mechanical design and worked on various projects. I am certified as 'Professional in Product Design and Analysis' by CADD.

Hello All, This is Saravana Kumar, having 3 years experience in Mechanical design and worked on various projects. I am certified as 'Professional in Product Design and Analysis' by CADD.

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and... Read more

I am a Structural Engineer and Architect CAD Technician specializing in Structural Designs and Architecture. I have gained valuable experience in structural design and analysis, seismic analysis, and various software applications like ETABS, STAAD, Planswift and AutoCAD. I am proficient in using AutoCAD and can do a Structural and Architectural related drawings. What I usually offers? (1) Structural Analysis and Design (2) Structural Plans (Structural framings, connections and detailing) (3) Analysis and Calculations (4) Architectural Drawing Plans (PDF's, sketches, and images to dwg file)

With over 8 years of experience as a Mechanical & Planning Engineer, I've specialized in Design and Detailed Engineering for both greenfield and brownfield projects across the automotive and oil & gas... Read more

With over 8 years of experience as a Mechanical & Planning Engineer, I've specialized in Design and Detailed Engineering for both greenfield and brownfield projects across the automotive and oil & gas sectors. My project portfolio includes Production facilities, Wellheads, Pipelines, Gas Processing Plants, Refineries, Bulk Oil Terminals, and Lube Plant projects. I'm adept at managing projects from the bidding stage to commissioning while adhering to project constraints. Currently, I'm serving as a mechanical & planning engineer across multiple projects.

Measurement and Cost Engineer and AutoCAD draughtsman (2D and 3D visualization), with experience in diverse residential, commercial, and interior/fit-out projects.

Measurement and Cost Engineer and AutoCAD draughtsman (2D and 3D visualization), with experience in diverse residential, commercial, and interior/fit-out projects.

3D Modeling using solidworks Analysis using Ansys Projects 1) Development and Evaluation of an optimized Hybrid powertrain ,Design using simplified Simulation methods. 2) Analysis of Coating and... Read more

3D Modeling using solidworks Analysis using Ansys Projects 1) Development and Evaluation of an optimized Hybrid powertrain ,Design using simplified Simulation methods. 2) Analysis of Coating and reducing friction ,wear ,and improve Heat reduction in engine . 3) Analysis of fluid Flow inside the engine. 4) Design and Analysis of Battery Charger using Stirling Engine . 5) Design and Analysis of Robotic Arm

My name is Rahul and I have extensive experience in product design, and I created more than hundreds of products on different crowd platforms. You can contact me for : - Designing 2D or 3D models fro... Read more

My name is Rahul and I have extensive experience in product design, and I created more than hundreds of products on different crowd platforms. You can contact me for : - Designing 2D or 3D models from scratch. - Step/Stl model outputs - Assembly designs - Sleek and unique model creation - Realistic rendering - detailed view images in best quality .etc

I am a professional CAD Designer with 1 year of experience in high quality 3D modeling using industry leading software like CATIA, UG Nx and AutoCAD. I can create multiple parts, assemblies, fixtures... Read more

I am a professional CAD Designer with 1 year of experience in high quality 3D modeling using industry leading software like CATIA, UG Nx and AutoCAD. I can create multiple parts, assemblies, fixtures, wraps, bottles, samples, and more. Whether you need technical drawings from 2D drawings, drawings, or 3D scanned data, I can provide precision drawings ready for CAM, fabrication, or 3D printing. My services include: 3D CAD Modeling Picture-reality translation 2D technical drawings Post-Production Technology Animation and movement studies Engineering Design and Analysis

#Accuracy #Consistent #Productivity Solidworks, X-Design, Siemens NX, Fusion 360, CATIA, AutoCAD Cloth Folding Machine, Electric Peeler, Laptop Cooling-pad With Water Circulation, Automated Plant Wat... Read more

#Accuracy #Consistent #Productivity Solidworks, X-Design, Siemens NX, Fusion 360, CATIA, AutoCAD Cloth Folding Machine, Electric Peeler, Laptop Cooling-pad With Water Circulation, Automated Plant Watering System , Design And Analysis of Tractor Trolley for heavy duty application

Until now, I designed and developed 500+ projects in India and Abroad. Also do research and development on different product verticals in the field of Engineering, Medical, Solar, and Food Industry.

Until now, I designed and developed 500+ projects in India and Abroad. Also do research and development on different product verticals in the field of Engineering, Medical, Solar, and Food Industry.

Design specialised in Motorsport Aftermarket parts,product design,invention design,tool design and basics in Character Modelling

Design specialised in Motorsport Aftermarket parts,product design,invention design,tool design and basics in Character Modelling

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a... Read more

Dear Customer Many Greetings I am the general manager and founder of the Structural Engineering Pioneers Bureau, I am a Ph.D. holder and Structural Consulting engineer in Cairo (Egypt). I am also a Professor of Structural Engineering. I am licensed as a Professional Engineer(PE). I am ready to stamp the drawings and calculation sheets with my USA PE stamp if needed. I have extensive experience +25 years of experience including the structural design and analysis of multi-story buildings using structural steel, reinforced concrete, post-tensioned and pre-stressed concrete, deep foundations, and structural masonry. I provided structural forensic studies and structural damage assessments throughout many locations around the world. I served as a credible expert witness and he analyzed and evaluated the cause of failures in a wide variety of structures, such as bridges, buildings, industrial structures, and metro stations under different extreme loading conditions. I am also registered as a structural consultant in the field of seismic assessment of existing buildings at the Applied Technology Council(ATC) of FEMA in California, USA. I work with my professional staff engineers who are into: 1. Excellent complete structural design competence for mainly reinforced concrete, steel, composite & and wooden structures; 2. In-depth knowledge of structural and civil codes (US & European Codes & Standards). 3. Assessment and evaluation the structural safety of the existing buildings; 4. Retrofitting design of un safe structures 5. Prepare the required studies and reports for repair, and strengthening of structures; and 6. Introducing others works related to structural engineering. We are using the most reliable computer software and comply with international codes and local standards, Please contact us for more details or any job inquiry you might have. We are professional, trustworthy, and reliable and offer quality service experience and a quick turn. Your prompt response will be highly appreciated. Note: We offer all engineering services at very competitive and special prices. Thanks & Regards, Structural Engineering Pioneers Bureau, SEPB

I am a Registered Civil/Structural Engineer with 12+ years of experience. AREA OF EXPERTISE 1. 3D Modelling using Revit Structure 2. Structural Design and Analysis 3. Steel & Reinforced Concrete Det... Read more

I am a Registered Civil/Structural Engineer with 12+ years of experience. AREA OF EXPERTISE 1. 3D Modelling using Revit Structure 2. Structural Design and Analysis 3. Steel & Reinforced Concrete Detailing. 4. Technical Reporting For me, the job is marked as completed when you are satisfied.

- A Design Engineer Professional - Specialization : Engineering Design, Drafting services, Research & Development, Design for Differently abled, Defense. Agricultural Design, Product Design and D... Read more

- A Design Engineer Professional - Specialization : Engineering Design, Drafting services, Research & Development, Design for Differently abled, Defense. Agricultural Design, Product Design and Development. Available to handle Freelance projects.

A applied bachelor of Design and Manufacture Engineering from Shipbuilding Institute of Polytechnic Surabaya. I am very passionate about manufacturing and mechanical engineering. I am able to design a... Read more

A applied bachelor of Design and Manufacture Engineering from Shipbuilding Institute of Polytechnic Surabaya. I am very passionate about manufacturing and mechanical engineering. I am able to design and understand 2D & 3D engineering drawing, 3D structure simulation. Good analytical thinking, hardworking and able to work under pressure, good personality and communication skills in terms of working individually or in team.

Hello everyone!! I have good experience and handson on following tools - Solidworks - Keyshot - Sketchup - AutoCAD And also similar 3D & CAD software I can provide following services... - 3D CADm... Read more

Hello everyone!! I have good experience and handson on following tools - Solidworks - Keyshot - Sketchup - AutoCAD And also similar 3D & CAD software I can provide following services... - 3D CADmodelling - ManufacturingDrawings - Product Rendering -Visualization - Static Analysis Thank you

Hey my self Harsh Gandhi from Ahmadabad. I had completed my Bachelor of Engineering in the field of Mechanical from Nirma University. I am proficient in using Solid-works and Ansys (Workbench & APDL).... Read more

Hey my self Harsh Gandhi from Ahmadabad. I had completed my Bachelor of Engineering in the field of Mechanical from Nirma University. I am proficient in using Solid-works and Ansys (Workbench & APDL). I am good at product development and design. I had done design of Hexapedal Robot at my university project for 2 years. I have immense interest in product development according to need of people. Whenever problem arise only creative product development can only regenerate the solution.I enjoy reading and writing. I like to write on social spectrum and current affairs.

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good... Read more

Hi, I am a Mechanical engineer. I have done specialization in the field of design and analysis. Now along with having creativity, I design products based on which follow laws of mechanics, taking good care of looks as well. To create my ideas into a virtual world, I use AutoCAD to create 2D sketches and do drafting work, and to create a 3D model, I use Solidworks. Now that I have practiced for quite some time, I have a great hand on Solidworks thus, I can create a complex design easily.

Qualification : Professional in Product Design and Analysis. : Bachelor of engi... Read more

Qualification : Professional in Product Design and Analysis. : Bachelor of engineering (Mechanical). Marital status : Single. Father’s name : K.ANDREW VICTOR. Current Address : CSI st.Andrew's church campus, (land mark – oppt to Kakkan Park) 2nd street, poldenpuram, thoothukudi – 628001.

I was born in Purworejo. I come from Vocational High School 1 Purworejo. Now I study at Politeknik Gajah Tunggal.

I was born in Purworejo. I come from Vocational High School 1 Purworejo. Now I study at Politeknik Gajah Tunggal.

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

CATIA based designing 3D products design Drone Design and simulation Automotive Design and Analysis Experience with 3d printing

I am An Aeronautical Engineer with proven skills in design and analysis. Skills : Product design , Part design, Creative design

I am An Aeronautical Engineer with proven skills in design and analysis. Skills : Product design , Part design, Creative design

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

I am G.Syam Pavan a graduate from KL University in the stream of Mechanical Engineering. I had completed 3 months full time course in E Mug Technologies on "Unigraphics"domain.It also covers some modu... Read more

I am G.Syam Pavan a graduate from KL University in the stream of Mechanical Engineering. I had completed 3 months full time course in E Mug Technologies on "Unigraphics"domain.It also covers some modules like part,drafting,surfacing,sheet metal,wireframe .I Can also read and develop drawings using GD&T Symbols according to ASME 14.5 Standards. 1.I had done my project on the design and analysis of Delta parallel Robot. 2 I had done my final year project on analysis on solar car frame.

Hello, my name is Himanshu. I have recently completed my postgraduate degree in Machine Design and Analysis from the National Institute of Technology, Rourkela.

Hello, my name is Himanshu. I have recently completed my postgraduate degree in Machine Design and Analysis from the National Institute of Technology, Rourkela.

MASTER IN MECHANICAL ENGINEER FROM SEPULUN NOPEMBER INSTITUTE OF TECHNOLGY AUTOMOTIVE, MANUFACTURE, CONTROL SYSTEM

MASTER IN MECHANICAL ENGINEER FROM SEPULUN NOPEMBER INSTITUTE OF TECHNOLGY AUTOMOTIVE, MANUFACTURE, CONTROL SYSTEM